Stu Davies advises PBO reader Richard Jales how to solve a leak in his boat's marine engine cooling system
Leakage around thermostat housing was evidenced by a deposit of dried salts. The pipe at exhaust riser end was also weeping Plastic Pipe Protection
We have a leak in the marine engine cooling system, evidenced by salts accumulating on top of the engine, mainly but not exclusively around the thermostat housing.
I think there are two issues: the pipe is leaking at its junction with the exhaust riser, and the thermostat housing itself also appears to be leaking.
O-ring from feed tube is badly perished
I am planning to replace the seals of the pipe and the thermostat O-ring.
While the whole thing is apart, it’s probably also worth replacing the thermostat.
I’m concerned that the bolts in the thermostat housing may shear, as there is corrosion present, and the housing is brass and the bolts are steel.
New coat of paint on the thermostat housing and feed pipe
If the bolts shear in the head then it could be a really difficult job to get them out.
My question is are these bolts commonly known to shear and is there a good way to avoid that?
In your experience are they likely to break?
After getting Stu’s advice, Richard successfully tackled the work required
I’m reasonably competent with things mechanical and have a good set of tools, including a torque wrench and powered impact driver.
Or would I be better off not to risk an attempt at the repair and get an experienced marine engineer to do it instead?
The leaks are coming from the O-rings for sure. Whether there’s also one coming from the thermostat housing, however, I’m not so sure.
So, it’s a good idea to do all of the likely sources of leaks.
New thermostat and O-ring seal in place
Your concerns about the bolts shearing? I don’t think they will, I haven’t had any reports of them doing so.
My advice in this case is to clean off the salts then apply lashings of penetrating oil.
The unique challenges of the marine environment mean regular engine servicing is essential for any boat owner. Winter is the…
During his 15 years as a marine engineer with the breakdown service Sea Start, Nick Eales has seen it all.…
PBO reader Paul Farr wants help in understanding his marine alternator. Engine whisperer Stu Davies comes to his aid
Is it worth buying a boat with a non-running engine? Vyv Cox has some tips on what to look for…
Leave for a day or so then apply moderate pressure to tighten the bolts first, before going for the undo.
You are not trying to turn them when tightening, just to apply pressure to ‘break the seal’.
Your plan of action is sound.
Reassembled engine cleaned up with a fresh coat of paint
Once apart, careful cleaning of the mating surfaces is essential and might also give you an opportunity to apply some primer and green paint to the rest of the engine around that area
Do you need an experienced marine engineer?
I don’t think it’s necessary given your grasp of the task in hand for what should be a relatively simple job.
A subscription to Practical Boat Owner magazine costs around 40% less than the cover price.
Print and digital editions are available through Magazines Direct – where you can also find the latest deals.
PBO is packed with information to help you get the most from boat ownership – whether sail or power.
Follow us on Facebook, Instagram and Twitter
Get every issue of PBO on Android, iPhone, iPad or desktop
There's life in them yet!
Elbow Pipe Cover How to avoid and spot the 15 big problems you don't want on a boat, the vital tasks you need to do on your boat this winter, the best sail and power boats for messing around on the river, how one sailor crossed the Atlantic by raft, truck and giant bottle... and more!